Medtronic Paradigm 522 Podręcznik Użytkownika Pobierz pdf (Strona 102)

Meter option

aradigm Link

™

and OneTouch

UltraLink

™

glucose meters can

be programmed to communicate wirelessly to the Paradigm

insulin pump. When the wireless feature is turned on, glucose

values transmitted from these meters to the pump are stored

in memory and used for glucose sensor calibration.

Your monitor is set at the factory with the meter option

turned off. If you have turned your meter option on, you

should turn off the wireless feature when using your glucose

sensor. By doing so, you can manually enter calibration

glucose values when glucose is stable and not changing

rapidly.

Instructions for turning the wireless feature OFF are outlined below.

• From the MAIN MENU, select UTILITIES and press ACT

• Scroll to METER OPTION and press ACT

• Select OFF and press ACT

You can set up your pump to automatically receive your blood glucose reading from a LifeScan OneTouch

UltraLink™ Meter or the BD Paradigm Link

Meter. This meter may not be available in all countries.

Programming your meter ID links your pump to the meter. If you do not link the meter to your pump, you

will enter your blood glucose readings manually. Each meter has its own unique ID. You can link up to

three meters to your pump.

When the pump is idle (at the HOME screen), it will beep or vibrate when it receives a blood glucose

reading from the meter. The reading will appear on the pump screen.

Meter

BG readings

NOTE: The use of RF (radio frequency) devices with the pump reduces pump battery life.

You have to turn on the meter option to add, delete or review the meter ID(s) programmed in your pump.

The meter ID is the serial number printed on the back of the meter

. See the user guide that came with

your meter for detailed information on how to use it.

Using the Bolus Wizard feature 83

Chapter 6

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 261 262

Brak uwag

Medtronic Paradigm 522 Podręcznik Użytkownika Strona 102