Medtronic Paradigm 522 Podręcznik Użytkownika Pobierz pdf (Strona 185)

BUTTON ERROR

Occurs if a button has been continually pressed for more than three minutes.

CHECK SETTINGS

When this alarm is active, you should check and/or reprogram your pump settings, including the time/

date.

E (ERROR)

An E-error alarm will show the letter E followed by two numbers. E-alarms cause all insulin delivery to

stop, the pump resets, and all your settings are cleared. After receiving this alarm, note the error number

then call your local Medtronic Diabetes representative for assistance.

EMPTY RESERVOIR

There is no insulin in the reservoir. Change the reservoir immediately.

FAILED BATT TEST

The pump tests the voltage of each battery installed. This test ensures a battery with low voltage is not

used. If the battery does not have enough voltage, this alarm will occur. The pump will not function and

the battery must be replaced. (Always make sure that you install a NEW battery into the pump.)

MAX DELIVERY

This alarm alerts you when you have taken more insulin than expected based on Maximum bolus and

Maximum basal rates.

MOTOR ERROR

Insulin delivery has stopped. This alarm occurs if your pump detects a motor error.

Troubleshooting and alarms166

1 2 ... 180 181 182 183 184 185 186 187 188 189 190 ... 261 262

Brak uwag

Medtronic Paradigm 522 Podręcznik Użytkownika Strona 185